Sunday, February 23, 2014

Ikea Groland kitchen island as pressing table.


Ikea Groland: My new Pressing station
Because it's a kitchen island, it has a bar for hanging towels and pans off of hooks....but it's perfect place to hang your patterns after ironing them!

Thanks for all your comments about my three Renfrews!!  I've been wearing the second and third versions quite a lot!

So in between the second and third versions, I "made" something else....I put together the Ikea Groland kitchen island for use as my pressing table. I needed a sturdy table for the Elna Press and wasn't thrilled with the press stand options which all looked rather flimsy.

I assembled it about a month ago, so any bad memories must have already been repressed, but I don't think it was too bad.  I bought it online and paid for the home delivery.  I do remember it took me 3 hours and 5 minutes to put together, over the course of two days (I was timing it--my original guesstimate was under an hour.)  I remember my hands hurting from trying to screw the screws in with a regular screwdriver, as the pre-drilled holes didn't seem wide/deep enough. So then I got out the drill and cordless screwdriver and charged them overnight.  I finished it up the next morning and it was SO MUCH EASIER.  Having the right tools for the job and all that.

what you need to put together the Ikea Groland

And here were all the pieces:
Ikea Groland
So here's what it looked like after I put it together.  I put away my big ironing board and put the miniature one on the table top.     My sewing room feels like it has SO MUCH SPACE now that the big ironing board has been put away.
Ikea Groland: My new Pressing station

I put all my pressing tools and my two irons on the second shelf.  By the way, the polka dotted Stitch Nerd ham, seam roll and ham stand are pretty fab.  I've been using them over a year now, and I don't know how I lived without them.  The ham is a must for darts.  I use the Angela Wolf clapper frequently too.  The point presser I've only used for one project since buying it, but I haven't been making anything that needs that tool lately.

All the stuff on the right side was corded mayhem:  my wireless router and cable modem.  Yesterday I traded out my old modem and router for a new modem/router combo unit which is 1) neater looking and 2) much faster on 2 of my 4 wireless devices, yay!


Ikea Groland as pressing stand
So this looks neater, now doesn't it?  There is still some more cord control to be had, but it is much better.

Ikea Groland as pressing stand
And here's what was replaced:
old router and modem
I really love having the stable table.  It weighs 70 pounds so it feels quite sturdy, even when using my Elna Press.  It's 36" high so there's no issues with bending.   It's almost as long as my cutting table but it's not nearly as wide so I can't recommend it as a cutting table.  Definitely great for pressing.  (Oh, and I was able to flip it over myself.  I wasn't sure if I'd be able to do it because of my back, but I did flipped it in two stages and was fine).

So I highly recommend a table like this.  Having the right tools for the job and all that.

Oh, and what animal (or two?) left these prints on my front sidewalk?
what animal is that?

I have a two more projects to show you.  I might finish a third tonight.  I was going to make chicken pot pie but it's hard to make that when you forgot to buy the chicken at the grocery store earlier on!

Be well!

Thursday, February 13, 2014

My Third Sewaholic Renfrew: Muppetlicious Texture

My third Sewaholic Renfrew

I'm still behind on posts and this post, like the last one, is brought to you courtesy of another snow day!  I think this is our 4th snow day this year, plus 1 early dismissal and 1 delayed opening.  Some years there is hardly any snow at all but this year is super, super snowy.

Thanks for all your comments on my serged renfrew from my last post.  I absolutely love love love that one and have worn it at least 4 times already.  (Fitting the Renfrew was covered in this post).  

When I saw this fabric at the ASE last September, I *knew* I had to have it!  I bought it in Emma Seabrooke's booth.  It's soft, has 25% crosswise stretch, and has tons of texture.  I also knew it was venturing into Muppets territory with this fabric, but I was willing to take the risk.
my Muppets shirt fabric
A bonus is this fabric has very subtle stripes, so graining it and cutting it out was super easy.  Also I did myself a favor and traced the front and back pattern pieces full sized so I wouldn't be cutting on the fold.   Too much shiftiness with knits to be cutting on the fold.
wrong side of Muppets shirt fabric
Wrong side of fabric is shown above.

What I wasn't expecting was how big that collar would be in such a textured fabric.  I'm not sure what's going on with my face here, but that collar is mighty big.  actually during the day it "settles down" and flattens out a bit

My third Sewaholic Renfrew


My third Sewaholic Renfrew

In this version I added some bust darts and as a result, there are no diagonal drag lines down the front.  The fabric has so much texture that the darts blend in.
My third Sewaholic Renfrew
No thumbholes this time; I was worried I might totally turn into a muppet if I went with the thumb holes.

There is so much texture to this fabric that all the seams blend in to each other.


My third Sewaholic Renfrew



Here are the dress form shots.  You can see how tall I can get the collar to be, but it doesn't stay that way.
My third Sewaholic Renfrew:  fuzzy!
My third Sewaholic Renfrew:  fuzzy!

My third Sewaholic Renfrew:  fuzzy!
My third Sewaholic Renfrew:  fuzzy!

I sewed this shirt on the sewing machine and then serged, just like the last one.  I like having the stitching from the machine so I have my guide for cutting.  Also basting helps with the fit.  I basted the arms as entirely 1" SA but this fabric has half the crosswise stretch as my last two versions so I actually needed   5/8" SA in the bicep and 1" in the forearm.

The serged edge looks fine when the right sides are together, but as you can see where I serged the raw edge for the sleeve hem, it had difficulty with all that texture.  Looks ugly, but I don't think  could have done better than that with, ahem, all that texture.  I don't have a wide range of serger thread colors so I went with navy.  Turquoise was already on the serger but I felt the navy looked better so I changed it.  I have changed my serger thread a few times this year, and it is not so scary anymore.  I think in 2014 it started off brown, then turquoise, then navy, and since this shirt I have changed it to white.  My main tip is before changing the thread, serge the fabric first in a few test samples, even though the thread is the wrong color. Get all the settings etc right first and have a great test sample.  Then change the thread and run another test sample.  I have been getting good results doing that...for me, if the sample is really bad after changing the thread, I clip all threads and rethread and then run the sample again.  That way I know it's a problem with the rethreading and not with how this fabric is behaving with my serger.

My third Sewaholic Renfrew:  fuzzy!
I stablilized the shoulder seam and pressed to back.  Raw edges are all serged.  Love love love how the inside looks with serged edges.
My third Sewaholic Renfrew:  fuzzy!
I blind hemmed the hems.  I remember back at PR Day 2011 in Austin,  PR member Leslie in Austin wore a sweater knit shirt she made (the Kwik Sew cowl neck one) and I asked her how she hemmed it.  "With my blind hemmer" she said.  I had no idea what that meant.  Now I understand there is a machine called a blind hemmer, but I used the "stretch blind hem" setting on my sewing machine and it worked like a charm.
blind hem is blind
That's the end of my sleeve.  Blind hem is blind.

So this fabric was actually quite easy to work with.  Highly recommend!

Ok, so last post Vanessa was commenting on serging sleeve caps.  I practised first.  I had a little bit of left over fabric from my first Renfrew so I cut out basically short sleeves and the armhole front/back and practiced first.  I have been doing a lot of pracicting on every technique before I try it to get the tension right and the technique down.  Also every knit is different so....

Here is the inside of one of my two practice sleeve caps.
interior sleeve cap practice
And here's the outside:
sleeve cap practice
I also practiced pressing the sleevecap on my ham. This made me feel more confident when it was time to sew up the real deal.

Ok, be careful out there if you're in a snowy clime.  I got a flat tire hitting a ginormous pot hole and I fell outside after taking a picture of the snow on the trees (though that was more to do with my own inattention than the ice itself).  It really shook me up!

Be well!


Monday, February 3, 2014

Milestone: serged knit Renfrew

Hi everyone!
I am totally behind on my posts.  This post is being brought to you courtesy of a snow day, yay!

So, last post I made the Sewaholic Renfrew in purple sweater knit from Stone Mtn and Daughter purchased during PR weekend 2013 in SF.    Beth from Sunny Gal helped me get the fit down, yay!

I made it again in the same sweater knit, this time in turquoise.  (Alternate titles for this post were "Groundhog Day" and "Oops, I did it again".).

I don't normally show you the interior of my garments, but when I do....I make sure to take lots and lots of photos!

Sewaholic Renfrew version 2
This is the first time I've ever serged a knit together!
Sewaholic Renfrew version 2
I sewed the seams on my sewing machine first (that's the navy thread line) with a slight zigzag stitch and then serged on my serger.  That's because I wanted to finalize the fit, and also because wasn't too sure I'd hit the 5/8" SA every time on my serger.  I used my stitch line as an additional guide.  I sewed with navy thread on my sewing machine to make it easier for me to see the stitching.
Sewaholic Renfrew version 2
I feel very grown up with my knit serged seams.
Sewaholic Renfrew version 2
The turquoise serger thread is the first serger thread I ever bought.  ATP and I were in NYC and she was determined to show me how to use my serger.  I would have chosen brown or black thread and she chose turquoise.  It is a great match for this shirt!
Sewaholic Renfrew version 2
I stabilized the shoulder seam and pressed to the back.
Sewaholic Renfrew version 2
shoulder seam.
Sewaholic Renfrew version 2
Sewaholic Renfrew version 2
This time I sewed the sleeves with 1" SA for a closer fit.  My photographer Ellen said the shirt seemed to fit me better, but the only difference was in the sleeves (well, color too).  The rest is the same.
Sewaholic Renfrew version 2
There is swayback pooling, but my Ellen "fixed it" for the shot, which really made me laugh.

Sewaholic Renfrew version 2

I am very proud of the sleeve cap too!  No wavy/bumpiness.
Sewaholic Renfrew version 2
I added the thumb holes again.
Sewaholic Renfrew version 2
This is to show my twin needle hem.
Sewaholic Renfrew version 2
Thumbs up
Sewaholic Renfrew version 2


I made one more Renfrew this weekend....which I'll show you next post.  The fabric is really neat.

Be well!  and if you live where it's snowing, hope your snow day is a sew day!