Sunday, February 28, 2016
Thank you for your comments from post 1 (the wool) and post 2 (the rayon bemberg lining). Today's Epic Skirt installment centers around lining a skirt with a kickpleat.
I had sewn skirts with linings before (easy, just cut the lining an inch shorter than the skirt) and I had sewn skirts with kickpleats before (S2154 being one of them ~5 years ago, followed the instructions just fine) but I had never sewn a skirt with a lining *and* a kickpleat.
I looked in my pattern stash; I had no skirt patterns with lined kickpleats.
I looked at my RTW skirts; none of them had lined kickpleats.
Tutorial for drafting and sewing lining to a kickpleat
So, I googled and found this tutorial by Blue Ginger Doll for drafting and sewing a lining one of their skirt patterns with a kickpleat. The first photo is "not found" but whatever it's of, it's not needed.
The drafting was pretty straightforward and non-scary. Only the back of the skirt needs to be drafted; the front pattern piece can simply be turned up 1" for cutting out the lining.
I made two samples first using black to represent the exterior of the skirt and muslin to represent the lining.
I think Step 10 should be clarified to include "sewn stopping at 5/8" at the top of the kickpleat".
In the real deal, I sewed step 14 by hand, to have the greatest amount of control as Sarah Veblen would say.
I didn't worry about not understanding the whole tutorial up front, just followed step by step and wow, it came out looking pretty ok!
Also I did not sew the darts into the skirt as per the Blue Ginger Doll instructions, but rather converted the darts to pleats as I had seen Handmade by Carolyn using that technique.
Left over right
I sewed the samples on Super Bowl Sunday (which has no meaning to me! I'm just using it as a marker in time); the kickpleat overlaps right over left. That Wednesday I went to a local consignment shop and a thrift store and found that all of the RTW skirts with lined kickpleats overlapped left over right (if you have the skirt right side out and are looking at the back of the skirt)
When I made the real deal, I reversed the tutorial instructions so that the left would overlap the right.
I also felt the kickpleat was too high and lowered the S2154 kickpleat by 1" (I had taken 3" out of the pattern at the lengthen/shorten line.)
I bought a Talbot's skirt (with tags and original $109 pricetag attached) for $6 at the thrift store. It does not fit me but it has a lined kickpleat and could be used as a "study garment".
1. The kickpleat exterior fabric is interfaced, on the wrong side, so I did this too.
2. The zipper exterior fabric is also interfaced, on the wrong side. I had already sewn the zipper to the exterior fabric so I missed the boat on interfacing there.
3. The Talbot's skirt was brand new, but the RTW skirts that had been worn all seemed to have a tear in the lining at the stress point where the lining is sewn to the exterior skirt. As a result of this, I interfaced the lining too in the kickpleat area.
Hemming the lining
I pressed up 1/2" (using the hot hemmer, on the wool setting with a dry iron and without a press cloth--my Black and Decker probably does not get as hot as a Rowenta) and stitched it down; then turned and pressed another 1/2" and stitched again for a double folded hem.
Hemming the wool
I serged the raw edge for a clean finish, then used the blind hem foot on my sewing machine to sew most of the hem. I hand stitched the fiddly bits of the kickpleat then pressed with my Elna Press and it all came out looking ok! Achievement Unlocked!
So, I still needed to attach the lining to the zipper, add a waistband and snaps, and add that adorable little thread chain that keeps the lining attached to the bottom of the skirt...details next post!
Tuesday, February 23, 2016
Thanks for your comments about Epic Skirt post #1! Now it's time for post #2: The Lining Fabric.
The best lining for wool?
Having never lined wool before, I took to IG to ask what fabric to use as lining. Rayon bemberg seemed to be the most popular response, and that is a fabric I don't have in my stash. It is super slippery, and I haven't really worked with any super slippery fabrics before. So it was adventure time!
Vogue Fabrics swatch card of almost 40 colors of rayon bemberg.
Procuring rayon bemberg
A google search revealed that rayon bemberg is also called Ambiance. (Oh! So that is what Amanda S always lines her garments with!) Joann's has it, but in limited colors. Vogue Fabrics has it in almost 40 colors. I've been swatching from online sites lately before buying the real deal, but somehow I felt confident enough to just go with 2 yards of "Gray" and also order a swatch card at the same time. For just $5, they send you a card with swatches of every one of their rayon bemberg colors (there is a similar card for Sofia ponte knits!)
The fabric arrived and matches the light gray in the wool, nice!
Pretreating rayon bemberg
Once again I took to IG to ask how to pretreat....should I take it to the dry cleaner? The official washing instructions are "dry clean only." Responses on IG ranged from dry clean"you can do that", to hover with steam, to throw it in the washer and line dry, to wash and dry that sucker but there will be wrinkles that won't come out. I also read a spirited message board on PR which contained oodles of suggestions, including Dryel, and the advantages and pitfalls of front loading washers-- a whole world I didn't know existed!).
Since I had 2 yards, I cut 2 generous swatches and machine washed them in cold, as I do all my clothes, in my standard issue totally non-fancy top-loading run-of-the-mill washing machine. I line dried one swatch and washed and machine dried the other on high heat in my not fancy but is on a pedestal to make it easier on my back dryer. Yes, there were wrinkles in both, but there were a lot less wrinkles in the machine dried sample. I wound up doing another round of samples that I dried on low heat. The samples did shrink. I pressed the sample on the wool setting (yes! I live dangerously!) with my Elna Press after spritzing with water first and found that the water spots did not come out. The wrinkles were reduced and "good enough" for me.
For the real deal, I rough cut 2 pieces of the bemberg: one piece for the front and another piece for the two backs, making sure to keep one selvedge (for the front piece) and both selvedges for the backs. I serged around the raw edges of the rough cuts, leaving the selvedge as-is. Then I washed and dried just the rough cuts and pressed, without any water, with my Elna Press.
The process of washing, drying and pressing the rayon bemberg seemed to cause the fabric to lose some of its slippery quality, which I felt made it easier to work with.
Graining rayon bemberg
I registered for and watched the relevant parts of Sarah Veblen's PR class "Sewing with Slippery and Drapey Fabrics". I used her snip and rip method for graining, which seemed to work quite well (so you definitely need the selvedge!)
Cutting rayon bemberg
Sarah is a die-hard "cuts with scissors" devotee whereas I am fully in the rotary cutter camp. I used my Dritz pattern weights to hold the fabric in place. For most fabrics I would only put weights on the pattern but for this I put weights over the whole thing: the pattern and the parts of the fabric not covered by the pattern. I used a fresh blade in my rotary cutter. My cutting mat is getting pretty old and manky, which provided some grippy texture. And I only cut out my pieces on the rough cut, which meant not dealing with too much fabric on my cutting table. For the back piece, I cut the rough cut down the middle into two pieces and then cut the backs out single layer.
Marking rayon bemberg
Somehow I did not test marking implements and went straight for the tailors wax which was a mistake in retrospect because after pressing the wax marks were highly visible. Next time I would use chalk. Also when I was cutting the lining I was lost in TLo's podcast about what it's like to attend NYFW and marked the darts as if I was sewing them in, when I convert darts to pleats in lining.
Serging rayon bemberg
I decided to serge the raw edges of the cut lining pieces before sewing instead of sewing and then serging. I had to reduce the DF on my serger, but sadly I did not write down the setting I used; it was one or two notches below N. I used the regular needles in my serger and they seemed fine.
Sewing rayon bemberg
Again I took to IG, where Lynn told me to use a walking foot and a microtex needle, which worked like a charm! It wasn't so bad to sew, actually. Pretty straightforward. I didn't have to overly wonder clip it either. I've been preferring wonder clips to pins lately. I sewed some samples first and lowered the foot tension down to 1 and the bobbin tension down to 1.8 or so, to get the least-puckered seams.
Sewing from where the zipper would end to the "dot" of the kick pleat, with my walking foot and microtex needle.
The pattern did not call for a lining so I had to draft my own....and also learn how to attach the lining to the kickpleat. How did I do it? Next post!
Sunday, February 21, 2016
Instead of writing one Epic Post about my #epicskirt, I'm going to spread it out into a few posts.
This skirt got me out of my sewing comfort zone in several ways:
- First time sewing with wool
- First time sewing with slippery lining fabric (rayon bemberg)
- Although I have lined skirts before, and sewn skirts with kickpleats before, this was my first time sewing a lined skirt with a kickpleat
- The pattern I chose did not have a lining which meant first time drafting a lining.
I really took my time with this skirt, taking the better part of two weekends to sew.
I'm somewhat allergic to wool. I can wear a wool coat if I have a scarf to protect my neck. I don't wear wool sweaters because even with a shirt underneath, some part of the sweater touches my skin, which itches and pinks up. I've considered this to be somewhat of a blessing as it means I have a whole category of fabric that I can't buy and stash.
Well, at the end of last October, velosewer was visiting from Australia. We were at Elliott Berman in NYC and she bought this textured wool, which she called "fluoro" because of the neon orange threads. I was super attracted to this off-limits wool fabric, and thought, I can make a skirt that is fully lined, and wear it with tights and a shirt tucked in--all of my skin will be covered. If I have to, I can wear gloves while sewing the wool. (The Heidi Boyd Whimsy Kits use wool felt, and sometimes my fingers are itchy after stitching with them, but not always.)
A-line or pencil skirt???
Since it was quite wide, I bought 3/4 of a yard of it. Normally I sew A-line skirts (with my beloved NL6483), but I felt like this fabric wants to be a pencil skirt. I sought advice on Instagram and the general agreement was yes, this fabric should be a pencil skirt. I went with S2154, a skirt I last sewed in 2011, in the size 14. I took 3 inches out of the length at the lengthen/shorten line. I traced the front piece on Swedish tracing paper so that I could cut it out single layer.
I asked velosewer how to pre-treat the wool and she said to take it to the dry cleaners. I serged the cut edges and brought it to the dry cleaner who looked at me like I had 5 heads for wanting to dry clean a piece of fabric. "What is this???" she said incredulously. I replied, "It's a piece of fabric." She said she didn't know what to call it, and I said it would be a skirt, so she charged me the skirt rate. Has anyone else had that reaction from a dry cleaner when pre-treating wool fabric?
Next: Procuring some lining fabric. Having never lined wool before, what would I use? Details next post!
Sunday, February 14, 2016
Mollie Makes Issue 36 kit-ish
Happy Valentine's Day! Last summer I bought a lot of 30-something Mollie Makes magazines on eBay. This kit from issue 36 is super adorable. It's actually supposed to be a brooch made entirely from vinyl and stuffed.
Well, step 1 of the instructions warn you to make sure that the templates are all facing the right direction when cutting them out, as the pieces only fit together one way. The letter templates were face up, so I assumed, without checking, that all other pieces should be cut face up as well. I cut out all my pieces, then went to put them together and....argh! It turns out, all other templates should be cut flipped over!!! Why wouldn't you consistently cut out the templates?? Instead of having a meltdown, I had dinner. I decided to use felt, and instead of making it as a brooch which I'm not going to wear, I stitched it like a Heidi Boyd whimsy hoop kit. The white and green felt were leftovers from Heidi Boyd Crafts kits, and the red and pink felt were from deep stash. The letters were cut from the black vinyl supplied with the kit. I followed their advice about using an exacto knife to cut out the letters--that made it a lot easier. The little gold beads came with the kit. Some black thread also came with the kit but I used my own embroidery floss with 3 strands.
It was pretty quick to stitch up. In order to have some consistency, I used this "measuring tape" tape to help me stitch stitches spaced ~1/4" apart... Here's a not-so-dramatic reenactment...
I didn't stuff it but it did turn out a bit puffy. Slits are cut into the scroll and tucked behind the heart, so it does give it some nice dimensionality.
Paper Source stickers. Text me is my favorite!
Stay warm and enjoy the day! I'm thinking of maybe going out for a heart shaped Dunkin' Donut and some of their hot chocolate but that means going out into the cold....hmmmm...
If you follow me on IG you know that I am working on my epic pencil skirt and hope to have it finished today!
Wednesday, February 3, 2016
Thank you for all your sweet words about my sweater sewn from a blanket!! It is a really great sweater to wear and I want to make more in varying lengths and neckline styles.
I have wanted a turquoise gingham shirt for several years now. I started a simple shell last summer, but then I wanted to make a bag for a friend's birthday, and I never got back to it. I rarely have UFOs, but there it was, hanging in my sewing room for 6 months. Why not finish it over Christmas break when it's seasonally inappropriate?
The fabric is 100% cotton from Mood, with 1/4" checks, and while it looked like yardage on the roll, it was actually panels that ended with this detail which I didn't use.
Finished front.NL 6483 view C was my starting point. I traced the 12 at the shoulders/neckline and a 14 everywhere else, and actually muslined first. I wound up doing a minimal SA at the shoulder, and 1.25 SA on the sides. After reading popo's review of NL 6483 where she cut a yoke onto the upper back (to highlight lace) I knew I wanted to highlight the bias of the gingham in the same manner, so I also cut a bias yoke. I also eliminated the CB seam so that the gingham would be in one continuous piece under the yoke.
It was up to the point where the shell was sewn together, but needed bindings and a hem.
First I took the time to match the gingham under the dart.
Then I got out the Clover bias maker. While I have made my own piping before, I have never made my double fold bias tape til now. Like making your own piping, it's pretty easy to make your own bias binding. Cut the strips on the bias, push it through the little plastic thingie, pull it out and iron it to make single fold bias tape. Then fold in half and press again to make double fold bias tape. When cutting the strips, I made sure the turquoise X's were straight down the middle to try to get some consistenecy of placement among all strips. Also, I don't do continuous bias, I just cut separate bias strips a little longer than the length I need, three strips in total: one for the neckline and two for each armhole.
Orignally I was just going to sew single fold bias tape on the inside of the armhole and neckline, but my bias binder is quite large, and so the idea of double fold was born. I was afraid that bias binding on the bias yoke might be too much bias, but I was reassured on Instagram that it's not and forged ahead.
I used the flange of my blind hem foot as a guide for sewing on the binding at a consistent width.
Time for buttons and button loops!
When I sewed the button on at the top, the whole yoke collapsed in an unattractive manner, so I wound up sewing 5 buttons on. The buttons were purchased at the ASE in the Soutache booth. I think they are dyed shell buttons. The button loops are elastic cord. This means I don't have to actually unbutton it to get it over my head--the loops just stretch and the neckline is pretty wide to begin with.
I hemmed it with a generous hem to give it a somewhat cropped look. It looks nice but mainly it was to insure that I had enough length. If the shell was too short, I could always undo the hem, press it and sew it with a smaller hem to make it longer.
I wore it to work on Friday with a gray bodysuit underneath, a gray Vogue 1247 skirt I sewed almost 5 years ago, gray sweater tights and my black winter boots. I got tons of compliments on it! I will say that it does not really fit all that well, I think I needed to leave more of a SA in the bust and potentially cut the 14 at the shoulders/neckline to give more length from shoulder to bust (an area that I'm actually short in, so usually my one-size-smaller in the neckline/armholes plan works). Somehow the bust dart is too high. I don't know why I didn't notice that at the muslin stage. Maybe I need to try my muslin on again.
Side view, hands in front pockets.
Even with the fit issues, I think it will get a lot of wear, because it's such a happy piece.