Monday, April 4, 2016

Athleisure Wear: Three Little Bears Edition

IMG_20160320_145406
Juuuuuust right!

Soooooo....back over holiday break I made the heart sweatshirt....and since then I've made two more sweatshirts and a pair of sweatpants.  Mainelydad, who tracks all the Milan runway trends for me, says this is officially called Atheleisure.  Ok, let's strut the runway!!
20160201_093019
Ok, so I did not wear this to work. This was just for the photos!
20160201_092921
Front
20160201_092957
Boom!  Elbow patches!



IMG_20160404_202005
Versions and Fabric Guide:
Version 1.0:  Juicy anchor stretch sweatshirt fabric; navy blue no-stretch sleeves from Joann's.
Version 2.0:  Pre-quilted gray soft-on-both sides stretch sweatshirt fabric from Joann's with darker gray contrasting stretch terry that I think has its origins at Kashi's.
Version 3.0:  Pre-quilted gray gray soft-on-both sides stretch sweatshirt fabric from Joann's with stretch aqua terry from Joann's...plus a pair of sweatpants to boot!

Note: I was planning on using the pre-quilted stretch sweatshirt fabric for a dress but then decided I would look too much like a roll of quilted paper towels and went this route.
20160206_150708

Elbow Patches
I used McCall's 6992 for all three sweatshirts, and added heart elbow patches to each one.  Like the three little bears, I think the first elbow patch I sewed on (the red one) is too small, the second one (the gray on gray) is too big and the third one is juuuuust the right size.

IMG_20160319_205505
Tips for sewing elbow patches on stretch fabric

  • Interface the heart and the area of the sleeve the patch will be sewn to.
  • Never ever pick up the presser foot to pivot except at the two points
  • Don't use too tight a zig zag stitch (I have to look up what settings I used).
  • If there is part of the heart that doesn't look good, undo just that part and redo it.  You won't be able to tell where you stopped and started.
  • Always practice with samples first
  • Triple check that your patches are in the right location, otherwise you will rip them both out when they both turn out to be too low or too high...ask me how I know.  :(
IMG_20160319_202310
IMG_20160124_212154
It was too low....the threads mark the former location....

Neckline
I felt the neckline was too high on the first version, so I cut an inch off the neckline all the way around, but it came out too big.
For the second version, I cut the neckline an inch lower in CF and CB, but kept the rest of the neckline the same.
For the third version, I cut the neckline as per the pattern, and it was juuuuust right.  (No, I don't know why it felt too high the first time and just fine the third time!)
20160320_155844

Binding the neckline
I bound the neckline by cutting a long strip of the contrasting knit crosswise, serge the long raw edges, stitch it down RS to RS while stretching the binding, then turn the binding to the wrong side, and stitch near, but not in, the ditch.  If I had sewn it the way the pattern instructs, the neckline would be higher overall.
20160124_144641
20160124_152917
Stiching near but not in the ditch, using my blind hem foot as a guide.
IMG_20160320_124519
20160320_155811
Hems
The raw edges were serged and then I twin needle stitched on my machine.
20160124_210932
Difficult to do on the sleeve hem...
20160320_201124
...but easier to sew on the pants.
Interior edges
I basted first on my sewing machine and then serged on my serger.  By the third version I suppose I could have just gone for it and serged it all on serger but I wasn't confident enough.
IMG_20160124_213420
Bonus!
But wait, there's more...I also made sweatpants and added a pocket for my phone.  I meant for the placement to be like cargo pants pockets. The pocket wound up being too high, but conveniently located.


20160320_210730
Is this photo kind of creepy?  I'm never ever owning a full body dressform, ever.
IMG_20160320_205059
Less creepy?
20160320_204758
I used Pamela's Fantastic Elastic and her method for sewing the elastic to the pants, but I divide the pants and elastic into eighths instead of quarters.
20160320_204840


Overall Verdict
I like version 1.0, but the sleeves are non-stretch fabric, so not as comfy as they could be.
Version 2.0 is pretty awesome, because I love how the back of the quilted fabric feels--it is fantastic!
But I love love love version 3.0 because of the color combo and how both of the fabrics feel--super soft..

18 comments:

  1. All 3 shirt shirts look so comfy cozy. Love that teal and grey one. I think the pocket on the pants is actually at a perfect location. Thanks for the tips!

    ReplyDelete
  2. I want these pieces for my own self. Really nice work Kyle!

    ReplyDelete
    Replies
    1. Hi Mary! It's straightforward to make one...or three. :) Go for it!

      Delete
  3. I want these pieces for my own self. Really nice work Kyle!

    ReplyDelete
  4. Really cute! I may need to copy you...

    ReplyDelete
    Replies
    1. Thanks Amanda! No doubt that you can do it! I loved the sweatshirt you made with the "wrong side" of the french terry as the binding.

      Delete
  5. Your pictures are terrific! The shirts are all so cute, but the pants really make a comfy looking outfit. I want a set for sewing days and weekends.

    ReplyDelete
    Replies
    1. Thanks Anne! It is a very comfy and warm outfit to wear.

      Delete
  6. SO cute. I love the patches.

    Which pattern did you use for the sweatpants?

    ReplyDelete
    Replies
    1. Thanks Duck Bucket! The sweatpants are from McCall's 4261.

      Delete
  7. I live in atheleisure-wear. Of course, I was in 'grunge'-wear before it was trendy too. Knits are super comfy.

    ReplyDelete
  8. Thank you for the tips on binding the neckline. Your knit necklines always look so good! The full-body dress form would be creepy if it were carrying a scythe or something. =) Otherwise, it's fine. LOL

    I love each version of your shirt.

    ReplyDelete

Thank you for reading! I love hearing from you! Because I've been getting lots of spam comments, I'm changing the settings to moderated comments.