Sunday, October 2, 2016

Epic Jean Jacket Post #4: Fitting the Sleeves and Sewing the Cuffs

IMG_20160910_154057
Thank you for all your kind comments about my jacket!

Confession:  I did not make a muslin before starting my #epicjeanjacket, the Style Arc Stacie.  I had sewn a StyleArc knit top several years ago in size 12 and it fit very well, except for the sleeves which were a bit tight in the bicep.  So, I was feeling pretty confident that the jean jacket would fit me, but when I wrapped the paper sleeve pattern around my bicep, it seemed like it was going to be too small.  Of course, my fabric has 15-20% stretch and paper has 0% stretch, so I decided to just test out the sleeve.

My fabric is Pacific Denim, and while I did not have enough purple to cut out two sets of sleeves, I did have some of the exact same denim in red, which I had ordered from Fabric.com. I cut out the red sleeves from the straight 12, and basted them into my purple jacket.

I tried it on with a shrug, as that would be the most likely way I would wear the jacket, over a sleeveless dress with a shrug, and the sleeves around the bicep were FINE!!

At this point, I decided to check the sleeve length.  I totally misunderstood what was going to happen in the cuff area, and I wound up taking an inch out of the length of the purple sleeves because of this misunderstanding.  Of course when it came time to actually sew the "cuff", I finally understood what was supposed to happen, and in actuality I could have added an inch to the sleeve length.  Oh well!

So the "cuff" isn't a real cuff, it's basically a really long sleeve that has a 3.5" hem.  This means you can turn the end of the sleeves up and it creates the look of the cuff.  The fold line on the pattern is the fold line for the HEM, not for turning it up after hemming.  So, hem it at 3.5" and then turn it up.

IMG_20160911_082154
Because the hem is so long, and it is in an area where the sleeve is really narrow, I took my very first BabyLock sewing machine out of the closet because it has the narrowest free arm out of all my machines.  I had to turn up the sleeve a bit too to be able to stitch the hem.  I used my white Chakoner to draw the line for the hem.  I did not sew in the round because I wanted to see my stitching on the outside of the jacket.  I stitched this part in purple though, so it does all blend in.  I guess I could have stitched in the round after all, but I didn't.

IMG_20160911_090529
I did stitch the topstitching in the round, and with the topstitching thread in the spool AND bobbin, since it would be seen from both sides if I ever wore the sleeves down instead of cuffed up.

Next time I would interface this whole area (all 3.5" x 2 = 7") so that the cuff would be more sturdy.  It also would make topstitching way easier.  Since my fabric has crosswise stretch, I had to put tissue paper underneath the cuff so that it wouldn't stretch while stitching.  Tissue paper would have been unnecessary if I had interfaced!!

I also felt the topstitching looked better on the interfaced parts of the jacket than it did on the non-interfaced cuffs.
IMG_20160911_104334
So, next time I will talk about the buttonholes and the jean shank buttons.
IMG_20160911_142534
The last photo before buttonholes and jean shank buttons!
IMG_20160930_180618
This is going to be my largest #pumkinette ever!!!  As long as nothing eats it.  Check out that stem!!

Be well!

10 comments:

  1. I think everything you make is epic Kyle - for real!

    ReplyDelete
  2. I think everything you make is epic Kyle - for real!

    ReplyDelete
  3. I have more instances of "interfacing regret" than I can count. I never seem to learn. Thanks for sharing all the details of this jacket. I see Wonder Clips! :).

    ReplyDelete
    Replies
    1. The crazy thing is the StyleArc pattern says nothing about interfacing any of the pieces! I interfaced the collar, facing and bottom band but it had not crossed my mind to interface the cuffs as they weren't really cuffs in my mind. If they had been separate cuff pieces I would have interfaced them. :)

      I loooove Wonder Clips. I hardly pin anymore--mainly just use clips.

      Delete
  4. Good call to test the biceps of those sleeves - beautiful work!

    ReplyDelete
  5. Life's too short for endless muslins!

    ReplyDelete
    Replies
    1. Agreed! There were so many pieces to this pattern, even if I just muslined the main pieces of the jacket, it still felt too overwhelming so I just went for the real deal. :)

      Delete
  6. This comment has been removed by the author.

    ReplyDelete

Thank you for reading! I love hearing from you! Because I've been getting lots of spam comments, I'm changing the settings to moderated comments.